养护机械配件与维修

产品描述

 1.拆卸插座：拆卸插头，将插座螺丝拧松，取下插座面板，将插座分解。

2.接线时必须按照电线的颜色及插座的接线孔进行正确连接，否则会引起电气故障。
3.连接电线：将电线插入插座内部的接线孔中，用组合钳夹紧，确保接触良好。其中，插座上方的孔为“零线”，下方的孔为“火线”，另外还有一个孔为“地线”。
4.接线后应该检查插头和插座是否接触良好，以免出现松动现象。以上就是插座的

5.固定插座：将插座面板放回原位，用螺丝固定好插座，将插头插入插座，检查插头和插座是否接触良好。

正确接线方法，希望大家在使用电器时能够认真按照以上步骤进行接线，确保电器的正常使用和人身安全。

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

企业介绍

公司供应摊铺机配件，压路机配件，铣刨机配件，摊铺机刮板驱动轴，刮板驱动轴总成，找平仪，找平仪支架以及液压泵和配件。还供应摊铺机易损件，摊铺机平衡梁，搅龙轴，踏板，输料底板，叶片，熨平板，减速机，链轨，履带板，支重轮，刮板大链条，输料链条等。

联系人：梁经理

联系方式：13645201509（微信同号）

QQ：2870202745

QQ邮箱：2870202745@qq.com

网易邮箱：LS13645201509@163.com

WhatsApp:+86  13645201509

1. Disassemble socket: Disassemble the plug, loosen the socket screws, remove the socket panel, and disassemble the socket.

2. When wiring, it is necessary to connect the wires correctly according to the color of the wires and the wiring holes of the sockets, otherwise it may cause electrical faults.

3. Connecting wires: Insert the wires into the wiring holes inside the socket, clamp them tightly with a combination clamp, and ensure good contact. Among them, the hole above the socket is the "neutral wire", the hole below is the "live wire", and there is also a hole for the "ground wire".

After wiring, it is necessary to check whether the plug and socket are in good contact to avoid loosening. The above is the socket

5. Fixed socket: Put the socket panel back in place, fix the socket with screws, insert the plug into the socket, and check if the plug and socket are in good contact.

The correct wiring method is recommended. We hope that everyone can carefully follow the above steps when using electrical appliances to ensure their normal use and personal safety.

Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it

Company Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.

Contact: Manager Liang

Contact information: 13645201509 (same WeChat account)

QQ：2870202745

QQ email: 2870202745@qq.com

NetEase email: LS13645201509@163.com

WhatsApp:+86  13645201509