徐工RP951沥青摊铺机配件及维修

发动机输油泵#O429-6790#O425.5728

文章出处:工程机械之家http://www.700618.com/人气: 发表时间:2023-01-31 10:25:12

 发动机输油泵的作用是将充足的燃油及时的送到高压油泵,保证燃油供应,油泵使燃油产生一定的压力,以克服滤清器和油道的阻力,并保证连续不断地向喷油泵输送足够数量的燃油。输油泵分为齿轮式输油泵,膜片式输油泵,柱塞式输油泵,管道式输油泵等等。

 免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除.

 

 

企业介绍

公司供应摊铺机配件,压路机配件,铣刨机配件,摊铺机刮板驱动轴,刮板驱动轴总成,找平仪,找平仪支架以及液压泵和配件。我厂还供应摊铺机易损件,摊铺机平衡梁,搅龙轴,踏板,输料底板,叶片,熨平板,减速机,链轨,履带板,支重轮,刮板大链条,输料链条等。


联系人:梁经理

联系方式:13645201509

(微信同号)

QQ:2870202745

The function of the engine fuel transfer pump is to send sufficient fuel to the high-pressure fuel pump in time to ensure fuel supply. The fuel pump makes the fuel produce a certain pressure to overcome the resistance of the filter and oil passage, and to ensure that a sufficient amount of fuel is continuously delivered to the fuel injection pump. Oil transfer pump is divided into gear type oil transfer pump, diaphragm type oil transfer pump, plunger type oil transfer pump, pipeline type oil transfer pump, etc.

Disclaimer | Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

Enterprise introduction

The company supplies paver parts, roller parts, milling machine parts, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of pavers, paver balance beams, auger shafts, pedals, feeding soleplates, blades, screeds, reducers, chain tracks, track shoes, rollers, scraper large chains, feeding chains, etc.

Contact: Manager Liang

Contact: 13645201509

(WeChat with the same number)

QQ:2870202745